• sales@oilandgaspipes.com
  • +91 (22) 23867336

Products

Products

Stockist, Suppliers and exporter of Carbon Steel SAW Pipes

ARROW is a stockist/supplier/exporter of API 5L pipe. ARROW PIPES AND PLATES is a professional industrial pipe manufacturer, based in India. Our products include seamless steel pipe, anti-corrosion steel pipe, welded steel pipe, and other industrial pipe. Our pipes are widely used for mechanical processing, boiler manufacturing, petroleum and natural gas transportation, venue construction, and more.

Carbon Steel SAW Pipes

We have a large scale unit engaged in stocking and exporting carbon steel tubes, carbon steel pipes and carbon steel welded pipes, carbon steel welded tubes and electrogalvanized steel tubes/pipes. we supply for engineering purpose, ERW pipes for water, gas & sewerage, carbon steel tubes for idlers of belt conveyors, water wells and lancing pipes for various automotive & industrial applications

Carbon Steel is used in the most critical engineering applications and also in certain applications in the automotive sector. In addition, some of the value-added Carbon Steel products include steel for LPG cylinders, API grade, corrosion resistant steel, critical structural application steel, boiler quality, auto grades, precision tubes and medium/high carbon grades, among others.

Carbon steel is a type of steel in which carbon is the primary alloying element, with the level of carbon contained in a steel being one of the most important factors governing its mechanical properties. Carbon steels have no more than 1.65 percent manganese, 0.6 percent silicon, or 0.6 percent copper. Carbon steels are available with varying levels of formability. The more formable grades are typically more costly than the less formable grades. Also called mild steel.

 

 

API 5L HSAW Pipes API 5L SAW Pipes
API 5L Gr.B Pipes API 5L Gr.B Pipes
API 5L X42 HSAW Pipes API 5L X42 SAW Pipes
API 5L X46 HSAW Pipes API 5L X46 SAW Pipes
API 5L X52 HSAW Pipes API 5L X52 Saw Pipes
API 5L X60 HSAW Pipes API 5L X60 Saw Pipes
API 5L X65 HSAW Pipes API 5L X65 Saw Pipes
API 5L X70 HSAW Pipes API 5L X70 Saw Pipes
 API 5L X80 HSAW Pipe API 5L X80 Saw Pipes
API 5L X100 Saw Pipes

 

API 5L Line Pipe API 5L Seamless Pipes
API 5L Line Pipe/ L290X42/ PSL1 API 5L X42 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L320X46/ PSL1 API 5L X46 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L360X52/ PSL1 API 5L X52 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L245B/ PSL1 API 5L X56 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L390X56/ PSL1 API 5L X60 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L415X60/ PSL1  API 5L X65 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L450X60/ PSL1 API 5L X70 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L485X70/ PLS1 API 5L X80 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L290M X42M/ PSL2 API 5L X100 PSL 1/2 Seamless Pipes
API 5L Line Pipe/ L290NX42N/ PSL2
API 5L Line Pipe/ L360NX52N/ PSL2 API 5L DSAW Pipes
API 5L Line Pipe/ L360MX52M/ PSL2 API 5L Gr.B DSAW Pipe
API 5L Line Pipe/ L390N X56N/ PSL2 API 5L X42 DSAW Pipe
API 5L Line Pipe/ L390M X56M/ PSL2 API 5L X46 DSAW Pipe
API 5L Line Pipe/ L415N X60N/ PSL2 API 5L X52 DSAW Pipe
API 5L Line Pipe/L415N X60N/ PSL2  API 5L X60 DSAW Pipe
API 5L Line Pipe/L450M X65M/ PSL2  API 5L X65 DSAW Pipe
API 5L Line Pipe/L485M X70M / PSL2  API 5L X70 DSAW Pipe
API 5L Line Pipe/ L555M X80M/ PSL2  API 5L X80 DSAW Pipe

 

 

API 5L Spiral Welded Pipes API 5L LSAW Pipes
API 5L Gr.B Spiral Welded Pipe API 5L Gr.B LSAW Pipe
API 5L X42 Spiral Welded Pipe API 5L X42 LSAW Pipe
API 5l X46 Spiral Welded Pipe API 5L X46 LSAW Pipe
API 5L X52 Spiral Welded Pipe API 5L X52 LSAW Pipe
API 5L X60 Spiral Welded Pipe API 5L X60 LSAW Pipe
API 5L X65 Spiral Welded Pipe API 5L X65 LSAW Pipe
API 5L X70 Spiral Welded Pipe API 5L X70 LSAW Pipe
API 5L X80 Spiral Welded Pipe API 5L X80 LSAW Pipe

 

 

PSL1
API 5L GR.B
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a
SEAMLESS PIPE
C Mn P S V Nb Ti
maxb max.b min. max. max. max. max. max.
0.28 1.20 0.030 0.030 c,d c,d d
WELDED PIPE
0.26 1.20 0.030 0.030 c,d c,d d
a 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and
0.15% maximum for molybdenum. For grades up to and including L360/X52, Cu,
Cr and Ni shall not be added intentionally.
b For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B, but = L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70.
c Unless otherwise agreed, the sum of the niobium and vanadium contents shall be = 0.06%.
d The sum of the niobium ,vanadium and titanium concentrations shall be = 0.15%.
MECHANICAL REQUIREMENTS
Weld seam of EW, SAW and COW pipes
Y.Sa T.Sa ELONGATION Tensile Strengthb
Mpa(psi) Mpa(psi) Mpa(psi)
min min min min
245(35 500) 415(60 200) 28% 415 (60 200)
a For intermediate grades, the differencec between the specified minimum tensile strength and the specified minimum yield strength for the pipe body shall be as given in the table for the next higher grade.
b For Intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determines for the pipe body using footnote a)
API 5L X42
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a
SEAMLESS PIPE
C Mn P S V Nb Ti
maxb max.b min. max. max. max. max. max.
0.28 1.30 0.030 0.030 d d d
WELDED PIPE
0.26 1.30 0.030 0.030 d d d
a 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum. For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.
b For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B, but = L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70.
d The sum of the niobium ,vanadium and titanium concentrations shall be = 0.15%.
MECHANICAL REQUIREMENTS
Weld seam of EW, SAW and COW pipes
Y.Sa T.Sa ELONGATION Tensile Strengthb
Mpa(psi) Mpa(psi) Mpa(psi)
min min min min
290(42 100) 415(60 200) c 415 (60 200)
API 5L X56
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a
SEAMLESS PIPE
C Mn P S V Nb Ti
maxb max.b min. max. max. max. max. max.
0.28 1.40 0.030 0.030 d d d
WELDED PIPE
0.26 1.40 0.030 0.030 d d d
a 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum. For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.
b For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B, but = L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70.
d The sum of the niobium ,vanadium and titanium concentrations shall be = 0.15%.
MECHANICAL REQUIREMENTS
Weld seam of EW, SAW and COW pipes
Y.Sa T.Sa ELONGATION Tensile Strengthb
Mpa(psi) Mpa(psi) Mpa(psi)
min min min min
390(56 600) 490(71 100) c 490 (71 100)
API 5L  X60
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a
SEAMLESS PIPE
C Mn P S V Nb Ti
maxb max.b min. max. max. max. max. max.
0.28e 1.40e 0.030 0.030 f f f
WELDED PIPE
0.26e 1.40e 0.030 0.030 f f f
a 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum. For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.
b For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B, but = L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70.
e Unless otherwise agreed.
f Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be = 0.15%.
MECHANICAL REQUIREMENTS
Weld seam of EW, SAW and COW pipes
Y.Sa T.Sa ELONGATION Tensile Strengthb
Mpa(psi) Mpa(psi) Mpa(psi)
min min min min
415(60 200) 520(75 400) c 520 (75 400)
API 5L X65
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a
SEAMLESS PIPE
C Mn P S V Nb Ti
maxb max.b min. max. max. max. max. max.
0.28e 1.40e 0.030 0.030 f f f
WELDED PIPE
0.26 1.45e 0.030 0.030 f f f
a 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum. For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.
b For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B, but = L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70.
e Unless otherwise agreed.
f Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be = 0.15%.
MECHANICAL REQUIREMENTS
Weld seam of EW, SAW and COW pipes
Y.Sa T.Sa ELONGATION Tensile Strengthb
Mpa(psi) Mpa(psi) Mpa(psi)
min min min min
450(65 300) 535(77 600) c 535 (77 600)
API 5L  X70
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a
SEAMLESS PIPE
C Mn P S V Nb Ti
maxb max.b min. max. max. max. max. max.
0.28e 1.40e 0.030 0.030 f f f
WELDED PIPE
0.26e 1.65e 0.030 0.030 f f f
a 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum. For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.
b For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B, but = L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70.
e Unless otherwise agreed.
f Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be = 0.15%.
MECHANICAL REQUIREMENTS
Weld seam of EW, SAW and COW pipes
Y.Sa T.Sa ELONGATION Tensile Strengthb
Mpa(psi) Mpa(psi) Mpa(psi)
min min min min
485(70 300) 570(82 700) c 570 (82 700)
PSL2
API 5L Gr.B
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
PIPE GRADE Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
L245R OR BR 0.24 0.40 1.2 0.03 0.02 c c 0.04 e 0.43 0.25
L245Q OR BQ 0.18 0.45 1.4 0.03 0.02 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
L245M OR BM 0.22 0.45 1.2 0.03 0.02 0.05 0.05 0.04 e 0.43 0.25
a Based upon product analysis. For seamless pipe with t>20.0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CELLW limits apply if the carbon mass fraction is greater than 0.12% and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0.12%.
b For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.05% above the specified maximum for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B
c unless otherwise agreed, the sum of th niobium & vanadium concentrations shall be = 0.06%
e Unless otherwise agreed, 0.50% maximum for copper, 0.30% maximum for nickel, 0.30% maximum for chromium, & 0.15% maximum for molybdenum.
CEIIW C+(Mn/6)+(Cu+Ni/15)+(Cr+Mo+V/5)
CEPcm C+(Si/30)+(Mn/20)+(Cu/20)+(Ni/60)+(Cr/20)+(Mo/15)+(V/10)+5B
MECHANICAL REQUIREMENTS
weld seam of HFW, SAW and COW pipes
Y.Sa T.Sa Ratio a,b,c Elongation Tensile strength d
Mpa(psi) Mpa(psi) Af Mpa(psi)
min max min max max min min
245(35 500) 450e (65 300)e 415 (60 200) 760 (110 200) 0.93 f 415 (60 200)
API 5L X42
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
0.24 0.4 1.2 0.03 0.02 0.06 0.05 0.04 e 0.43 0.25
0.18 0.45 1.4 0.03 0.02 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
0.22 0.45 1.3 0.03 0.02 0.05 0.05 0.04 e 0.43 0.25
a Based upon product analysis. For seamless pipe with t>20.0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CELLW limits apply if the carbon mass fraction is greater than 0.12% and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0.12%.
b For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.05% above the specified maximum for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B
e Unless otherwise agreed, 0.50% maximum for copper, 0.30% maximum for nickel, 0.30% maximum for chromium,
CEIIW C+(Mn/6)+(Cu+Ni/15)+(Cr+Mo+V/5)
CEPcm C+(Si/30)+(Mn/20)+(Cu/20)+(Ni/60)+(Cr/20)+(Mo/15)+(V/10)+5B
MECHANICAL REQUIREMENTS
weld seam of HFW, SAW and COW pipes
Y.Sa T.Sa Ratio a,b,c Elongation Tensile strength d
Mpa(psi) Mpa(psi) Af Mpa(psi)
min max min max max min min
290(42 100) 495 (71 800) 415 (60 200) 760 (110 200) 0.93 f 415 (60 200)
API 5L X56 
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
0.24 0.45 1.4 0.03 0.02 0.10 f 0.05 0.04 d,e 0.43 0.25
0.18 0.45 1.5 0.03 0.02 0.07 0.05 0.04 d,e 0.43 0.25
WELDED PIPE
0.22 0.45 1.4 0.03 0.02 d d d e 0.43 0.25
a Based upon product analysis. For seamless pipe with t>20.0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CELLW limits apply if the carbon mass fraction is greater than 0.12% and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0.12%.
b For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.05% above the specified maximum for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B
d the sum of the niobium & vanadium & titanium concentrations shall be =0.15%
e Unless otherwise agreed, 0.50% maximum for copper, 0.30% maximum for nickel, 0.30% maximum for chromium, & 0.15% maximum for molybdenum.
f Unless otherwise agreed
CEIIW C+(Mn/6)+(Cu+Ni/15)+(Cr+Mo+V/5)
CEPcm C+(Si/30)+(Mn/20)+(Cu/20)+(Ni/60)+(Cr/20)+(Mo/15)+(V/10)+5B
MECHANICAL REQUIREMENTS
weld seam of HFW, SAW and COW pipes
Y.Sa T.Sa Ratio a,b,c Elongation Tensile strength d
Mpa(psi) Mpa(psi) Af Mpa(psi)
min max min max max min min
390(56 600) 545 (79 000) 490 (71 100) 760 (110 200) 0.93 f 490 (71 100)
API 5L X60
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
0.24f 0.45f 1.4f 0.03 0.02 0.10 f 0.05f 0.04f g,h as agreed
0.18f 0.45f 1.7f 0.03 0.02 g g g h 0.43 0.25
WELDED PIPE
0.12f 0.45f 1.6f 0.03 0.02 g g g h 0.43 0.25
a Based upon product analysis. For seamless pipe with t>20.0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CELLW limits apply if the carbon mass fraction is greater than 0.12% and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0.12%.
b For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.05% above the specified maximum for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B
f Unless otherwise agreed
g Unless otherwise agreed the sum of the niobium, vanadium & titanium concentrations shall be =0.15%
h Unless otherwise agreed, 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, & 0.50% maximum for molybdenum.
CEIIW C+(Mn/6)+(Cu+Ni/15)+(Cr+Mo+V/5)
CEPcm C+(Si/30)+(Mn/20)+(Cu/20)+(Ni/60)+(Cr/20)+(Mo/15)+(V/10)+5B
MECHANICAL REQUIREMENTS
weld seam of HFW, SAW and COW pipes
Y.Sa T.Sa Ratio a,b,c Elongation Tensile strength d
Mpa(psi) Mpa(psi) Af Mpa(psi)
min max min max max min min
415(60 200) 565 (81 900) 520 (75 400) 760 (110 200) 0.93 f 520 (75 400)
API 5L X65
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum
Cb Si Mnb P S V Nb
SEAMLESS & WELDED PIPES
0.18f 0.45f 1.7f 0.03 0.02 g g
WELDED PIPE
0.12f 0.45f 1.6f 0.03 0.02 g g
a Based upon product analysis. For seamless pipe with t>20.0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CELLW limits apply if the carbon mass fraction is greater than 0.12% and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0.12%.
b For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.05% above the specified maximum for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B
f Unless otherwise agreed
g Unless otherwise agreed the sum of the niobium, vanadium & titanium concentrations shall be =0.15%
h Unless otherwise agreed, 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, & 0.50% maximum for molybdenum.
CEIIW C+(Mn/6)+(Cu+Ni/15)+(Cr+Mo+V/5)
CEPcm C+(Si/30)+(Mn/20)+(Cu/20)+(Ni/60)+(Cr/20)+(Mo/15)+(V/10)+5B
MECHANICAL REQUIREMENTS
weld seam of HFW, SAW and COW pipes
Y.Sa T.Sa Ratio a,b,c Elongation Tensile strength d
Mpa(psi) Mpa(psi) Af Mpa(psi)
min max min max max min min
450(65 300) 600 (87 000) 535 (77 600) 760 (110 200) 0.93 f 535 (77 600)
API 5L X70
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
0.18f 0.45f 1.8f 0.03 0.02 g g g h 0.43 0.25
WELDED PIPE
0.12f 0.45f 1.7f 0.03 0.02 g g g h 0.43f 0.25
a Based upon product analysis. For seamless pipe with t>20.0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CELLW limits apply if the carbon mass fraction is greater than 0.12% and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0.12%.
b For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.05% above the specified maximum for manganese is permissible, up to a maximum of 1.65% for grades = L245 or B
f Unless otherwise agreed
g Unless otherwise agreed the sum of the niobium, vanadium & titanium concentrations shall be =0.15%
h Unless otherwise agreed, 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, & 0.50% maximum for molybdenum.
CEIIW C+(Mn/6)+(Cu+Ni/15)+(Cr+Mo+V/5)
CEPcm C+(Si/30)+(Mn/20)+(Cu/20)+(Ni/60)+(Cr/20)+(Mo/15)+(V/10)+5B
MECHANICAL REQUIREMENTS
weld seam of HFW, SAW and COW pipes
Y.Sa T.Sa Ratio a,b,c Elongation Tensile strength d
Mpa(psi) Mpa(psi) Af Mpa(psi)
min max min max max min min
485(70 300) 635 (92 100) 570 (82 700) 760 (110 200) 0.93 f 570 (82 700)

 

Physical Properties Of API 5L Pipes (PSL1)
Grade Minimum Yield Strength: Maximum Yield Strength: Minimum Tensile Strength: Maximum Tensile Strength
API 5L X42 42,000 psi None 60,000 psi None
API 5L X46 46,000 psi None 63,000 psi None
API 5L X52 52,000 psi None 66,000 psi None
API 5L X56 56,000 psi None 71,000 psi None
API 5L X60 60,000 psi None 75,000 psi None
API 5L X65 65,000 psi None 77,000 psi None
API 5L X70 70,000 psi None 82,000 psi None

 

Physical Properties Of API 5L Pipes (PSL2)
Grade Minimum Yield Strength: Maximum Yield Strength: Minimum Tensile Strength: Maximum Tensile Strength
API 5L X42 42,000 psi 72,000 psi 60,000 psi 110,000 psi
API 5L X46 46,000 psi 76,000 psi 63,000 psi 110,000 psi
API 5L X52 52,000 psi 77,000 psi 66,000 psi 110,000 psi
API 5L X56 56,000 psi 79,000 psi 71,000 psi 110,000 psi
API 5L X60 60,000 psi 82,000 psi 75,000 psi 110,000 psi
API 5L X65 65,000 psi 87,000 psi 77,000 psi 110,000 psi
API 5L X70 70,000 psi 90,000 psi 82,000 psi 110,000 psi

 

API 5L Grade B to API 5L X80 ( API Seamless Line Pipe)
Size Range: 1/2″ – 36″
Schedules : Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH
Grades : API 5L Grade B PSL1, API 5L X42 PSL1, API 5L X46 PSL1, API 5L X52 PSL1, API 5L X56 PSL1, API 5L X60 PSL1, API 5L X65 PSL1, API 5L X70 PSL1, API 5L X80 PSL1, API 5L Grade B PSL2, API 5L X42 PSL2, API 5L X46 PSL2, API 5L X52 PSL2, API 5L X56 PSL2, API 5L X60 PSL2, API 5L X65 PSL2, API 5L X70 PSL2, API 5L X80 PSL2
Keywords : x42, x46, x52, x56, x60, x65, x70, x80, x42 seamless pipe, x46 seamless pipe, x52 seamless pipe, x56 seamless pipe, x60 seamless pipe, x65 seamless pipe, x70 seamless pipe, x80 seamless pipe, carbon steel x42 pipe, carbon steel x46 pipe, carbon steel x52 pipe, carbon steel x56 pipe, carbon steel x60 pipe, carbon steel x65 pipe, carbon steel x70 pipe, carbon steel x80 pipe, x42 grade pipe, x46 grade pipe, x52 grade pipe, x56 grade pipe,x60 grade pipe, x65 grade pipe, x70 grade pipe, x80 grade pipe, seamless pipe grade x42, seamless pipe grade x46, seamless pipe grade x52, seamless pipe grade x56, seamless pipe grade x60, seamless pipe grade x65, seamless pipe grade x70, seamless pipe grade x80
API 5L Grade B to API 5L X80 ( API Welded Line Pipe, API ERW PIPE, API LSAW/DSAW PIPE, API HSAW PIPE)
Size Range: 1/2″ – 100″
Schedules : Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH
Grades : API 5L Grade B lsaw, API 5L X42 lsaw, API 5L X46 lsaw, API 5L X52 lsaw, API 5L X56 lsaw, API 5L X60 lsaw, API 5L X65 lsaw, API 5L X70 lsaw, API 5L X80 lsaw,
API 5L Grade B erw, API 5L X42 erw, API 5L X46 erw, API 5L X52 erw, API 5L X56 erw, API 5L X60 erw, API 5L X65 erw, API 5L X70 erw, API 5L X80 erw,
API 5L Grade B hsaw, API 5L X42 hsaw, API 5L X46 hsaw, API 5L X52 hsaw, API 5L X56 hsaw, API 5L X60 hsaw, API 5L X65 hsaw, API 5L X70 hsaw, API 5L X80 hsaw
Keywords :x42 welded pipe, x46 welded pipe, x52 welded pipe, x56 welded pipe, x60 welded pipe, x65 welded pipe, X70 welded pipe, x80 welded pipe, x42 erw pipe, x46 erw pipe, x52 erw pipe, x56 erw pipe, x60 erw pipe, x65 erw pipe, x70 erw pipe, x80 erw pipe, api erw pipes stock, api pipes supplier, api pipes manufacturer, api pipes stockiest, api pipes stock, line pipe, oil & gas pipeline, api pipe, api seamless pipe, api welded pipe, api erw pipe, api lsaw pipe, api dsaw pipe, api saw pipe, api grade x42, api grade x46, api grade x52, api grade x56, api grade x60, api grade x65, api grade x70, api grade steel, api pipe grade x42, api pipe grade x46, api pipe grade x52, api pipe grade x56, api pipe grade x60, api pipe grade x65, api pipe grade x70, api pipe grade x80
API5L Grade B X-42 X-46 X-52 X-56 X-60 X-65 X-70 X-80 DSAW/LSAW/SAW
Size Range: 26″ – 100″
Schedules :  10, 20, 30, Std, 40, 60, XS, 80, 100, 120, 160, XXS/XXH & heavier
Grades : API-5L Gr B, API-5L Gr X42, API-5L Gr X46, API-5L Gr X52, API-5L Gr X56, API-5L Gr X60, API-5L Gr X65, API-5L Gr X70, API-5L Gr X80
Grade bm psl1, X42m psl1, x46m psl1, x52 psl1, x56 psl1, x60 psl1, x65 psl1, x70 psl1, x80psl1
Grade bm psl2, X42m psl2, x46m psl2, x52 psl2, x56 psl2, x60 psl2, x65 psl2, x70 psl2, x80psl2
Keywords : x42m lsaw pipe, x46m lsaw pipe, x52m lsaw pipe, x56m lsaw pipe, x60m lsaw pipe, x65m lsaw pipe, X70m lsaw pipe, x80m lsaw pipe, api saw pipe manufacturer, api sour service pipe, api hic pipe, api sour service pipe stock, api saw hic pipes, api hic pipes, api ssc pipes, hic tested api pipes, ssc tested api pipes, high tensile carbon steel pipes, 450 mpa seamless pipe, 485 mpa seamless pipe, 415 mpa seamless pipe, 60 ksi seamless pipe, 65 ksi seamless pipe, 70 ksi seamless pipe, carbon steel spiral pipe, carbon steel hsaw pipe, carbon steel welded pipe, carbon steel api pipe