• sales@oilandgaspipes.com
  • +91 (22) 6635 5665

API 5L X65 PIPES

API 5L X65 PIPES

API 5L X65

Grade X65 indicates 65000 PSI minimum yield strength and 77000 PSI minimum ultimate tensile strength.

API Standard Specification for Line Pipe

The American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries.  API 5L is suitable for conveying gas, water, and oil.

When authoring the standards, the technical committee recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2.  PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.

Grades covered by this specification are A25, A, B and “X” Grades X42, X46, X52, X56, X60, X65, X70, and X80.  The two digit number following the “X” indicates the Minimum Yield Strength (in 000’s psi) of pipe produced to this grade.

API 5L X65 LSAW Pipe

Quick Product Details:

Thickness: 5 – 50 mm Section Shape: Round Outer Diameter: 219.1 – 1820 mm
Place of Origin: India Secondary Or Not: Non-secondary Application: Oil Pipe
Technique: SAW Certification: API Surface Treatment: As per your requirement
Alloy Or Not: Non-alloy Grade: 20#,16Mn,St37,St52,St35.8,St45-8,Q235,Q345,Q195,Q215,10#-45#,ST35-ST52,Q195-Q345 Standard: BS EN10219,BS EN10217,GB/T 9711.1-1997,GB/T 3091-2001,DIN EN 10217-1-2005,ASTM A252-1998,API 5CT,API 5L,BS,GB,DIN,ASTM,API

Specifications :

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a
SEAMLESS PIPE
C Mn P V NB Ti
maxB max.B min. max. max. max. max. max.
0.28E 1.40E 0.030 0.030 F F F
WELDED PIPE
0.26E 1.40E 0.030 0.030 F F F
MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
MPA(psi) MPA(psi)
min min min
415(60 200) 520(75 400 F

API5L X65 LSAW Steel Pipe

Longitudinal Submerged-Arc Welded Steel Pipe

Process:LSAW – UO(UOE),RB(RBE),JCO(JCOE,COE)

DSAW -Double Submerged arc welded

Out Diameter: 219mm – 1820mm(8″-72″)

Wall Thickness:5.0 – 50mm

Length:6 – 12m

Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, GB/T3091, GB/T9711

Certificate: API 5L PSL1 / PSL2, API 5CT

Steel Grade: API 5L: GR B, X42, X46, X56, X60, X65, X70
ASTM A53: GR A, GR B, GR C
EN: S275, S275JR, S355JRH, S355J2H

DIN: ST37, ST52
GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555

Usage: Used for low pressure liquid delivery, such as water, gas, and oil.

Surface:Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement