• sales@oilandgaspipes.com
  • +91 (22) 23867336



API 5L X60


ARROW is a India’s most trusted suppliers of API 5l x60 Pipe in Seamless and Welded. As one of the biggest Suppliers/Traders of API 5l x60 Pipe to power plants across the world, we stock an extensive inventory of high quality API 5l x60 Pipe to ensure best service to our customers, API 5l x60 Pipe manufacturers in India, API 5l x60 seamless pipe Manufacturers in India.
The American Petroleum Institute specification API 5L covers seamless and welded steel line pipe. This is steel pipe for pipeline transportation systems in the petroleum and natural gas industries.
API 5L is suitable for conveying gas, water, and oil. Size range is limited only by manufacturer’s capabilities.
API 5L x60 Pipes are manufactured as per specifications established by American Petroleum Institute (API). API 5L is a specification of API which defines the standard for the dimension, physical, mechanical and chemical properties of the steel.
API 5L Pipe available in all special steel grades like X42 Pipe/X46 Pipe/X52 Pipe/X56 Pipe/X60 Pipe/X65 pipe/X70 pipe/X80 pipe in PSL-1 & PSL-2.

Grade X60 indicates 60000 PSI minimum yield strength and 75000 PSI minimum ultimate tensile strength.

API Standard Specification for Line Pipe

The American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries.  API 5L is suitable for conveying gas, water, and oil.

When authoring the standards, the technical committee recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2

.  PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.

Grades covered by this specification are A25, A, B and “X” Grades X42, X46, X52, X56, X60, X65, X70, and X80.  The two digit number following the “X” indicates the Minimum Yield Strength (in 000’s psi) of pipe produced to this grade.

Minimum Yield Strength: 60,000 psi 60,000 psi
Maximum Yield Strength: None 82,000 psi
Minimum Tensile Strength: 75,000 psi 75,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This is a standard
line pipe grade specifiedin API (American Petroleum
Institute) specification 5L.

API 5L X60 LSAW Pipe

Quick Product Details:

Thickness: 8 – 50 mm Section Shape: Round Outer Diameter: 406 – 1422 mm
Place of Origin: India Secondary Or Not: Non-secondary Application: Oil Pipe
Technique: SAW Certification: API Surface Treatment: Galvanized
Special Pipe: API Pipe Alloy Or Not: Non-alloy Test: UT,hydrostatic,RT ,X-ray
forming: J-C-O-E output: 1500000mt/year Grade: 20#,15CrMo,12Cr1MoV,15MnV,16Mn,A53(A,B),A106(B,C),API J55,St52,Q235,Q345,10#-45#,Cr-Mo alloy,Mn-V alloy,A53-A369,API J55-API P110,ST35-ST52,Q195-Q345
Standard: BS EN10296,BS EN10025,BS EN 10297,BS EN 39,BS EN10217,JIS G3461-2005,JIS G3469-2002,GB/T 9711.1-1997,GB/T 9711.2-1999,GB/T9711,DIN EN 10305,ASTM A106-2006,ASTM A53M-2007,ANSI B36.10M-2004,API 5L,BS,JIS,GB,DIN,ASTM,API

Specifications :

Mass fraction, based upon heat and product analysis a
C Mn P V NB Ti
maxB max.B min. max. max. max. max. max.
0.28E 1.40E 0.030 0.030 F F F
0.26E 1.40E 0.030 0.030 F F F
MPA(psi) MPA(psi)
min min min
415(60 200) 520(75 400 F