• sales@oilandgaspipes.com
  • +91 (22) 6635 5665

API 5L ERW PIPES

API 5L ERW PIPES

High Frequency Electric Resistance Welded [HF-ERW] Pipes

ARROW supplies Carbon Steel High Frequency Electric Resistance Welded (HF-ERW) Pipes with an annual installed capacity of 100,000 MT. HF-ERW pipes are made from hot rolled flat steel strip, formed into tubular shape and the longitudinal seam is welded by the application of mechanical squeezing of edges and heating the edges through High Frequency Electric Resistance applied by induction or conduction. The weld joint is achieved without addition of any filler metal.

Salient Features

  • Capability to manufacture pipes as per API 5L Grade API X-80 or equivalent
  • All testing facilities in-house to meet International Standards

Application Industry:

  • Oil and Gas Pipeline
  • Plumbing
  • Heating
  • Water Supply Systems
  • General purpose applications
  • Structural Pipe

API 5L Gr B Carbon Steel ERW PIPES

Sizes (Seamless): 1/2” NB – 24” NB
Sizes (ERW): 1/2”NB – 60”NB
Sizes (SAW): 16” NB – 100” NB
Wall Thickness available: Schedule 20 – Schedule XXS (heavier on request) up to 250 mm thk.

API Line pipe grade designations come from API Spec 5L Specification. Standard Line Pipe has grade designation A and B. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi), e.g. X60 for pipe having a minimum yield strength of 60 ksi. See the table below for the standard available grades.

API 5L Gr b Carbon Steel ERW Pipes Physical Properties

API 5L Grade Yield Strength
min.
(ksi)
Tensile Strength
min.
(ksi)
Yield to Tensile Ratio
(max.)
Elongation
min.
%1
A 30 48 0.93 28
B 35 60 0.93 23
X42 42 60 0.93 23
X46 46 63 0.93 22
X52 52 66 0.93 21
X56 56 71 0.93 19
X60 60 75 0.93 19
X65 65 77 0.93 18
X70 70 82 0.93 17
X80 80 90 0.93 16

API 5L Gr B Carbon Steel ERW Pipes & Tubes are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory.

ARROW have exported API 5L Gr B Carbon Steel ERW Pipes & Tubes to over 60 countries including Sudan, UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazil, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, , Angola & Sri Lanka.

The API 5L Gr B Carbon Steel ERW Pipes & Tubes are used in Hardware, Petro-Chemical Industry, Oil and Gas Industry, Nuclear Industry, Pulp & Paper Indusry, Research & Development, Mega Projects & Defense & Development Industries. In fact wing to the special grade of steel API 5L Gr B Carbon Steel ERW Pipes & Tubes are used for all critical applications.

ARROW is the supplier of high quality with prompt services. carbon steel is the easily the most selling Material. due to the excellent properties and general usage in highly corrosive environment. We have more than 2o years of experience in serving API 5L Gr B Carbon Steel Pipes & Tubes.

API 5L GRADE B Carbon Steel Pipes & TubesAPI 5L Grade B PIPES

API 5L ERW Carbon Steel Pipes Grade X42/X46/X52/X56/X60/X65/X70/X80/PSL-1/PSL-2

Stockholder, Suppliers and Exporter of API 5L Grade B carbon Steel ERW Pipes 

This specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe.

The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
Sizes (Seamless): 1/2NB – 24″ NB
Sizes (ERW): 1/2NB – 60″ NB

Sizes (SAW): 16NB – 100″ NB

Wall Thickness available:
Schedule 20 – Schedule XXS (heavier on request) up to 250 mm thk.

 

API 5L Gr X42 Carbon Steel ERW PIPE-

ARROW is a active Exporter, Supplier, Distributor, Wholesaler, Trader, Retailer and Importer of a wide range of  Carbon Steel Pipes and Tubes such as Seamless Pipes and ERW Pipes, and Many more. By focusing on Carbon steel seamless pipe we have acquired a significant position in this segment as a specialist on the Indian market as well as in Gulf Countries.Image result for api 5l x42 erw pipes
We offer the following range of products Seamless Pipes and Tubes, Carbon Steel Seamless Pipe, HFW welded Pipe and many more. We are the Leading Exporter of API 5l gr x42 pipes, API 5l gr x42 psl 1/psl2 pipes, API 5l gr x42 ERW pipe from Mumbai.
We hold expertise in supplying and exporting superior quality range of API 5L GR X42 PSL 1/ PSL2 LSAW Pipes. All the offered pipes are designed and manufactured using high-grade carbon steel material and modern technology. These pipes are provided to clients in different sizes, lengths and thicknesses at reasonable prices.

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
X42 0.24 0.4 1.2 0.025 0.015 0.06 0.05 0.04 e 0.43 0.25
X42 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
X42 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

 

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
290(42 100) 495(71 800) f

 

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

ERW Standard and Line Pipe Grades:

API 5L X42 PSL1 PSL2
Minimum Yield Strength: 42,000 psi 42,000 psi
Maximum Yield Strength: None 72,000 psi
Minimum Tensile Strength: 60,000 psi 60,000 psi
Maximum Tensile Strength None 110,000 psi
Notes: This is a standard  line pipe grade specification API (American Petroleum Institute) specification 5L.

 

 

API 5L Gr X46 Carbon Steel ERW PIPE-

ARROW is a active Exporter, Supplier, Distributor, Wholesaler, Trader, Retailer and Importer of a wide range of  Carbon Steel Pipes and Tubes such as Seamless Pipes and ERW Pipes, and Many more. By focusing on Carbon steel seamless pipe we have acquired a significant position in this segment as a specialist on the Indian market as well as in Gulf Countries. Related image
We offer the following range of products Seamless Pipes and Tubes, Carbon Steel Seamless Pipe, HFW welded Pipe and many more. We are the Leading Exporter of API 5l gr x46 pipes, API 5l gr x46 psl1/psl2 pipes, API 5l gr x46 ERW pipe from Mumbai.
We hold expertise in supplying and exporting superior quality range of API 5L GR X46 PSL1/PSL2 LSAW Pipes. All the offered pipes are designed and manufactured using high-grade carbon steel material and modern technology. These pipes are provided to clients in different sizes, lengths and thicknesses at reasonable prices.

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
X46 0.24 0.4 1.2 0.025 0.015 0.06 0.05 0.04 e 0.43 0.25
X46 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
X46 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

 

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
290(42 100) 495(71 800) f

 

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

ERW Standard and Line Pipe Grades:

API 5L X46 PSL1 PSL 2
Minimum Yield Strength: 46,000 psi 46,000 psi
Maximum Yield Strength: None 76,000 psi
Minimum Tensile Strength: 63,000 psi 63,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This is a standard line pipe grade specification API (American Petroleum Institute) specification 5L.

 

API 5L Gr X52 Carbon Steel ERW PIPE-

ARROW is a active Exporter, Supplier, Distributor, Wholesaler, Trader, Retailer and Importer of a wide range of  Carbon Steel Pipes and Tubes such as Seamless Pipes and ERW Pipes, and Many more. By focusing on Carbon steel seamless pipe we have acquired a significant position in this segment as a specialist on the Indian market as well as in Gulf Countries. Related image
We offer the following range of products Seamless Pipes and Tubes, Carbon Steel Seamless Pipe, HFW Welded Pipe and many more. We are the Leading Exporter of API 5l gr X52 pipes, API 5l gr X52 psl1/psl2 pipes, API 5l gr X52 ERW pipe from Mumbai.
We hold expertise in supplying and exporting superior quality range of API 5L GR X52 PSL 1/PSL2 LSAW Pipes. All the offered pipes are designed and manufactured using high-grade carbon steel material and modern technology. These pipes are provided to clients in different sizes, lengths and thicknesses at reasonable prices.

 

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
X52 0.24 0.4 1.2 0.025 0.015 0.06 0.05 0.04 e 0.43 0.25
X52 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
X52 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

 

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
290(42 100) 495(71 800) f

 

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

ERW Standard and Line Pipe Grades:

 

API 5L X52 PSL1 PSL2
Minimum Yield Strength: 52,000 psi 52,000 psi
Maximum Yield Strength: None 77,000 psi
Minimum Tensile Strength: 66,000 psi 66,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This is a standard line pipe grade specification API (American Petroleum Institute) specification 5L.

 

API 5L Gr X56 Carbon Steel ERW PIPE

ARROW is a active Exporter, Supplier, Distributor, Wholesaler, Trader, Retailer and Importer of a wide range of  Carbon Steel Pipes and Tubes such as Seamless Pipes and ERW Pipes, and Many more. By focusing on Carbon steel seamless pipe we have acquired a significant position in this segment as a specialist on the Indian market as well as in Gulf Countries. Related image
We offer the following range of products Seamless Pipes and Tubes, Carbon Steel Seamless Pipe, HFW Welded Pipes and many more. We are the Leading Exporter of API 5l gr X56 pipes, API 5l gr X56 psl1/psl2 pipes, API 5l gr X56 ERW pipe from Mumbai.
We hold expertise in supplying and exporting superior quality range of API 5L GR X56 PSL 1/PSL 2 LSAW Pipes. All the offered pipes are designed and manufactured using high-grade carbon steel material and modern technology. These pipes are provided to clients in different sizes, lengths and thicknesses at reasonable prices.

 

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
X56 0.24 0.4 1.2 0.025 0.015 0.06 0.05 0.04 e 0.43 0.25
X56 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
X56 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

 

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
290(42 100) 495(71 800) f

 

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

ERW Standard and Line Pipe Grades:

API 5L X56 PSL1 PSL2
Minimum Yield Strength: 56,000 psi 56,000 psi
Maximum Yield Strength: None 79,000 psi
Minimum Tensile Strength: 71,000 psi 71,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This is a standard line pipe grade specification API (American Petroleum Institute) specification 5L.

 

API 5L Gr X60 Carbon Steel ERW PIPE

ARROW is a active Exporter, Supplier, Distributor, Wholesaler, Trader, Retailer and Importer of a wide range of  Carbon Steel Pipes and Tubes such as Seamless Pipes and ERW Pipes, and Many more. By focusing on Carbon steel seamless pipe we have acquired a significant position in this segment as a specialist on the Indian market as well as in Gulf Countries. Related image
We offer the following range of products Seamless Pipes and Tubes, Carbon Steel Seamless Pipe, HFW Welded Pipes and many more. We are the Leading Exporter of API 5l gr X60 pipes, API 5l gr X60 psl1/psl2 pipes, API 5l gr X60 ERW pipe from Mumbai.
We hold expertise in supplying and exporting superior quality range of API 5L GR X60 PSL1/PSL2 LSAW Pipes. All the offered pipes are designed and manufactured using high-grade carbon steel material and modern technology. These pipes are provided to clients in different sizes, lengths and thicknesses at reasonable prices.

 

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
X60 0.24 0.4 1.2 0.025 0.015 0.06 0.05 0.04 e 0.43 0.25
X60 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
X60 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

 

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
290(42 100) 495(71 800) f

 

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

API 5L X60 PSL1 PSL2
Minimum Yield Strength: 60,000 psi 60,000 psi
Maximum Yield Strength: None 82,000 psi
Minimum Tensile Strength: 75,000 psi 75,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This is a standard line pipe grade specification API (American Petroleum Institute) specification 5L.

 

API 5L Gr X65 Carbon Steel ERW PIPE-

ARROW is a active Exporter, Supplier, Distributor, Wholesaler, Trader, Retailer and Importer of a wide range of  Carbon Steel Pipes and Tubes such as Seamless Pipes and ERW Pipes, and Many more. By focusing on Carbon steel seamless pipe we have acquired a significant position in this segment as a specialist on the Indian market as well as in Gulf Countries. Image result for api 5l erw x65 pipes
We offer the following range of products Seamless Pipes and Tubes, Carbon Steel Seamless Pipe, HFW Welded Pipe and many more. We are the Leading Exporter of API 5l gr X65 pipes, API 5l gr X65 psl 1/p, API 5l gr X65 ERW pipe from Mumbai.
We hold expertise in supplying and exporting superior quality range of API 5L GR X65 PSL1/PSL2 LSAW Pipes. All the offered pipes are designed and manufactured using high-grade carbon steel material and modern technology. These pipes are provided to clients in different sizes, lengths and thicknesses at reasonable prices.

 

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
X65 0.24 0.4 1.2 0.025 0.015 0.06 0.05 0.04 e 0.43 0.25
X65 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
X65 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

 

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
290(42 100) 495(71 800) f

 

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

API 5L X65 PSL1 PSL2
Minimum Yield Strength: 65,000 psi 65,000 psi
Maximum Yield Strength: None 87,000 psi
Minimum Tensile Strength: 77,000 psi 77,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This is a standard line pipe grade specification API (American Petroleum Institute) specification 5L.

 

API 5L Gr X70 Carbon Steel ERW PIPE-

ARROW is a active Exporter, Supplier, Distributor, Wholesaler, Trader, Retailer and Importer of a wide range of  Carbon Steel Pipes and Tubes such as Seamless Pipes and ERW Pipes, and Many more. By focusing on Carbon steel seamless pipe we have acquired a significant position in this segment as a specialist on the Indian market as well as in Gulf Countries. Image result for api 5l erw x70 pipes
We offer the following range of products Seamless Pipes and Tubes, Carbon Steel Seamless Pipe, HFW Welded Pipe and many more. We are the Leading Exporter of API 5l gr X70 pipes, API 5l gr X70 psl1/psl2 pipes, API 5l gr X70 ERW pipe from Mumbai.
We hold expertise in supplying and exporting superior quality range of API 5L GR X70 PSL1/PSL2 LSAW Pipes. All the offered pipes are designed and manufactured using high-grade carbon steel material and modern technology. These pipes are provided to clients in different sizes, lengths and thicknesses at reasonable prices.

 

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
X70 0.24 0.4 1.2 0.025 0.015 0.06 0.05 0.04 e 0.43 0.25
X70 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
X70 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

 

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
290(42 100) 495(71 800) f

 

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

API 5L X70 PSL1 PSL2
Minimum Yield Strength: 70,000 psi 70,000 psi
Maximum Yield Strength: None 90,000 psi
Minimum Tensile Strength: 82,000 psi 82,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This is a standard line pipe grade specification API (American Petroleum Institute) specification 5L.